Shannon Kish - Artist

This is my art diary. I love to dabble in different things, but mainly I love to draw, sculpt and make jewelry. This site documents my lessons learned as I delve into other areas of "play."
As you can see, I have a bit of an obsession with big-headed men. I like the large craniums. Stay a bit and look around!

If you're interested in purchasing any art or jewelry, please visit my web store at http://www.shannonkishartist.com/

Thursday, February 12, 2009

How to Put a Dust Cover on a Frame

A while back, I took down all my framed big-headed man drawings and opened those babies up. I needed to take them out of their frames and get them scanned into a digital format so that I could start selling art prints of my work. I still had the frames and the glass and foam board backing, but I never got around to putting them back together with the dust cover and mounting hardware.

So recently I was getting ready for an exhibit and it forced me to get them all framed again. I called a few frame shops to find out what it would cost to get the paper backing or dust covers put back onto the frames. They said probably about $15.00 per piece. Well, I had about eight or nine pieces to do and I thought that was a little out of my price range AND I would have to lug them over there AND wait a couple of weeks until they finished with them. Being the poor, lazy and impatient person that I am, I decided to take matters into my own hands and learn how to put a dust cover on a framed picture.

"How hard could it be?" I thought. I've taught myself so many other things, this should be a cinch. A few Google searches brought up some web pages, but nothing that really told me how to do it. Also, I didn't know the term was "dust cover" so I kept searching for "paper backing on frame." Eventually, I got to a site that sold the materials in a kit that also came with instructions. Turns out, the process isn't hard at all. You just have to have the materials and know the process. So I'm here to share that with you to make your journey a little easier...I hope.

Here are the materials you will need (besides your already-framed piece):


  • brown craft paper (sometimes spelled "kraft" paper)
  • roll of double-sided adhesive transfer tape or -plain old Elmer's Glue
  • spray bottle with water or wet sponge
  • hairdryer (optional, but recommended)
  • dust cover trimmer or a utility knife and straight edge (I highly recommend the dust cover trimmer. It's very easy to use.)

Once you have your supplies laid out, get your framed piece and lay it on a flat surface. The pic of my piece below shows the remnants of the dust cover that I had ripped off to remove my drawing from the frame, so just pretend that's not there. ;-) Cut your craft paper to a size about one to two inches larger than your frame on all sides. For example, if your frame is 20 x 26, add two inches to height and width, and cut a piece 22 x 28. It doesn't have to be exact. You just want the additional paper hanging over the side for cutting. Set the paper aside for later use.

Start rolling out your transfer tape onto each of the four sides of your frame, completing the process on each side before moving to the next one.

Step one: Roll out the tape


Step two: Press the tape firmly onto the frame, making sure that the tape is, in fact, adhering appropriately.











Step three: Peel the backing from the tape so that you are left with the double-sided tape sticking to the frame with another sticky side up to adhere to the paper that we will use in the next phase. Repeat this process until all four sides of your frame have the tape adhered.

OPTION 2: Apply white glue, such as Elmer's, along each side of the frame. I personally like the tape because it's not as messy in the next step.

Now we're ready for the next phase: Applying the craft paper.

Take the paper that you previously cut and dampen it in one of two ways. You can either spritz it with a spray bottle or wipe it with a damp sponge. I personally prefer the spritzing method.



Lay the dampened paper on top of your frame so that the paper is hanging over the sides. It doesn't have to be perfectly taut, since this will be taken care of in the drying phase.



Using your thumb and forefinger, crease the paper along the sides, so that the paper is folded over the edges, then run your finger over each side to press the paper onto the double-sided tape.



You don't have to do this next step, but I found it helpful. Fold the excess paper underneath your frame to hold it in place during the drying process. As the craft paper dries, it becomes stiff, so this will prevent the paper from lifting up.



This drying step can either be achieved by allowing the paper to air dry or you can hasten the process by using a hairdryer. I recommend it highly. Take the hairdryer and start blowing the paper dry. This is the cool part. As I stated previously, when the water begins to evaporate from the paper, it begins to stiffen and "shrink", removing the creases and crinkles right before your eyes. I enjoyed it. It doesn't take much to entertain me. This process will make the paper very taut and drum-like.

I've also included a video of the process below, so you can see how the paper begins to tighten up. You may want to turn your volume down, since it's a bit annoying with the hairdryer drone.




Once your paper is completely dry and taut, you're ready for the next phase: Trimming off the excess paper.


I highly recommend using a dust cover trimmer. It's specifically made for this process and will make your job much easier. Holding the trimmer at an upward angle with the point of the blade on the frame, begin making your cut by sliding the trimmer down the length of the frame. The trimmer has about an eighth of an inch lip on it so the blade will sit at the appropriate spot on the frame and guide the trimmer along the edge of the frame.



Once you've reached the bottom of the first side, pull the excess paper away and move on to the next side of the frame, repeating the process until all sides have been trimmed away.

You now have a fabulous dust cover to complete and finish off your lovely piece of art. The next step would be to apply mounting hardware, which is pretty simple, so I haven't included it in this tutorial.

By the time I got to my last framed piece, I felt like I was a pro. There are little nuances here and there, but this is the basic process. Happy framing all!

Monday, January 12, 2009

Blending with Color Pencils

So I've had this picture of a big-headed king that I've been working on, but then I lost the motivation and put it away for a time. I've just recently pulled him back out to finish him and I must say it's been very rewarding for me. I've learned some blending techniques with colored pencil that I'm really excited about. The first pic shows the piece at the time I put it away, already colored in with marker with some rough sketched color pencil fill. The second is a photo of the finished piece after blending in phases. I should have thought about taking pics of the process from the beginning, but, alas, I did not.

Big-headed King by Shannon Kish - DRAFTBig-headed King by Shannon Kish - Finished



I think the shading and color overall turned out pretty well. It's all about working in layers of colors, much like the way I shade in a grayscale pencil drawing. I learned a technique a while back of coloring in a pencil drawing with markers, then doing the shading and highlighting with colored pencils. I've only done it a handful of times, though I've had cool results. I don't know why, but I've always been a little afraid of color in my drawings. And oil paint just scares the crap out of me. It seems so permanent. That's one of the reasons I like to work in clay. It's a very forgiving medium. But, I digress...

So using this technique, I'll work from my lightest to darkest colors in sketch lines, finishing the first phase by blending with a blending stick. Then I start the whole process all over, concentrating on filling in the white divets in the color, created by the grain of the paper, as well as filling in "missing strokes" where the previous color's lines didn't touch. I love the effect this produces and have used it while painting some of my clay pieces, too.

I've discovered if I take the lightest tone (a whitish pink or whitish yellow or whitish blue, etc.) of an area and cover where it's already saturated with that hue of colored pencil, it starts to actually blend the colors together, leaving the highlights and shading intact. It's pretty sweet and gives a really cool effect, but it does take a lot of time since there are so many colors involved in each layer.

Big-headed Skull - by Shannon KishI've only ever taken a pic of one other thing I did with color pencils and that was on black paper. It's my big-headed skull. Check it.

All in all, I would say I'm pretty pleased with the results from my latest color endeavor. Hope this info is helpful to someone, somewhere, delving into the world of blending with color pencils.

Saturday, November 29, 2008

Understanding Jumprings in Jewelry Making


In my exploration and experience with jewelry-making, I've had to research things to gain an understanding of terminology and engineering of jewelry design. One thing that I encountered in my beginning days of exploration was the need for jumprings. You simply can't create a piece of jewelry without jumprings. Any time you want to connect two things together, you need one. They come in all different sizes, diameters and thicknesses. I was a little lost and overwhelmed at first. What size do I get? And, hey, what do all these numbers mean?

The majority of jumprings in my jewelry design happen to be in your 3mm to 8mm diameter range, but they go from 2mm all the way up to 20mm. One would assume that the lower the number, the smaller the ring and when dealing with diameter, you would be right.

However, with thickness, it's just the opposite. The smaller the gauge number, the thicker the ring. Generally, in my jewelry design, I'll use 22-gauge, which is very thin and flexible, all the way up to 16-gauge, which is very sturdy and thick. I like 16-gauge a lot, especially when you get into the bigger-diameter rings. It's tough and stands up to a bit of yanking and tugging and, because it's a bit thicker, you get a beautiful shine off the metal. My designs are all sterling silver, but the same would hold true for any shiny metal, I suppose. My average, most-used jumprings are 3mm/22-gauge, 5mm/18-gauge, and 8mm/16-gauge. Definitely a pattern as to the diameter versus gauge. If you want sturdy rings, the smaller the diameter number, the larger the gauge number. Thicker rings are definitely better when dealing with chainmaille designs (something I've always wanted to do, but I don't think I have the patience for it) and thinner rings are great for delicate, flowy designs.

Just my little tidbit of information to anyone out there who is going through what I went through in trying to understand the "mystery" of jumpring measurements. Have fun!